Side seal semi-auto strapping machine 

Description:

YYIPACK-SS1 high quality semi automatic Carton Case Strapping Bundling Machine is capable of allotting, tightening and fastening polypropylene straps around the packages, automatically.Its heater assists in applying pressure on the strap and connects the ends with heat welds. Semi automatic strapping machine power switch have inbuilt sensors that makes the motor to switch off while not working and again restarts automatically with the insertion of strap.

How to use: 

Inserting the strap into the machine, triggering the induction switch, the main motor drives the CAM operation, the right cutter rises, fixed the right side of the packing belt, the main motor stops, the deputy motor starts to withdraw the belt to tighten the packaging. After the packaging belt tightening, packaging material, extension shut down due to increased friction, vice motor resistance changes due to stop at this moment, the program main board to control the main motor drives the CAM again, running to the top of the left knife rising fixed on the left side of the pack, heating permed hair into two layers of packaging belt between melt packing belt surface, cutting knife rising at the same time, in the heating permed hair out, The middle cutter completes the action of pressurized fusion of the packing belt and cutting off the packing belt. The packing action is completed, the positioning slide plate is backward, and the auxiliary motor runs to send a section of packing belt again.

Main Parameters of our high quality semi-auto strapping machine: